System-sensor M500DM Bedienungsanleitung PDF herunterladen

MOUNTING

Mounts directly to 4-inch square electrical boxes (see Figure 2A). The box

must have a minimum depth of 2

/8 inches. Surface mounted electrical boxes

(SMB500) are available from System Sensor.

FIGURE 2. MODULE MOUNTING: FIGURE 2B:

C1075-00

SS-460-009 1 I56-3869-001

M500DM Dual Monitor Module

INSTALLATION AND MAINTENANCE INSTRUCTIONS

3825 Ohio Avenue, St. Charles, Illinois 60174

1-800-SENSOR2, FAX: 630-377-6495

www.systemsensor.com

BEFORE INSTALLING

This information is included as a quick reference installation guide. Refer to

the control panel installation manual for detailed system information. If the

modules will be installed in an existing operational system, inform the opera-

tor and local authority that the system will be temporarily out of service. Dis-

connect power to the control panel before installing the modules.

NOTICE: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION

The Dual Monitor Module is intended for use in intelligent, two wire systems.

It provides two independent 2-wire initiating device circuits (IDC), at two sep-

arate, consecutive addresses. It is capable of monitoring normally open con-

tact fire alarm and supervisory devices, or either normally open or normally

closed security devices.

COMPATIBILITY REQUIREMENTS

To ensure proper operation, these modules shall be connected to listed com-

patible system control panels only.

FIGURE 1. CONTROLS AND INDICATORS:

C0917-01

SPECIFICATIONS

Normal Operating Voltage: 15 to 32 VDC

Maximum Current Draw: 6.4 mA (LED on)

Average Operating Current: 750 µA (LED flashing)

EOL Resistance: 47K Ohms

Maximium SLC wiring resistance: 40 Ohms

Maximum IDC wiring resistance: 1,500 Ohms

Maximum IDC Voltage: 11 Volts

Maximum IDC Current: 240µA

Temperature Range: 32°F to 120°F (0°C to 49°C)

Humidity: 10% to 93% Non-condensing

Dimensions: 4

/2 in H x 4.275 in W x 1.4 in D (Mounts to a 4-inch square by 2

/8-inch deep box.)

Accessories: SMB500 Electrical Box

I56-3869-001

1 2

M500DM Dual Monitor Module 1

Inhaltsverzeichnis

Seite 1 - M500DM Dual Monitor Module

MOUNTINGMounts directly to 4-inch square electrical boxes (see Figure 2A). The box must have a minimum depth of 21/8 inches. Surface mounted elec

Seite 2

Kommentare zu diesen Handbüchern

Keine Kommentare

System-sensor M500DM Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung System-sensor M500DM herunter. System Sensor M500DM User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung System-sensor M500DM