System-sensor CZ-6 Bedienungsanleitung PDF herunterladen

BEFORE INSTALLING

This information is included as a quick reference installation

guide. Refer to the appropriate control panel installation manual

for detailed system information. If the modules will be installed in

an existing operational system, inform the operator and local au-

thority that the system will be temporarily out of service. Discon-

nect the power to the control panel before installing the modules.

This system contains static sensitive components. Always ground

yourself with a proper wrist strap before handling any circuits so

that static charges are removed from the body. The module hous-

ing should also be grounded.

NOTICE: This manual should be left with the owner/user of

this equipment.

D500-49-00 1 I56-1799-005

INSTALLATION AND MAINTENANCE INSTRUCTIONS

CZ-6 Six Zone Interface Module

SPECIFICATIONS

Normal Operating Voltage: 15-32 VDC

Stand-By Current: 2 mA

Alarm Current: 40 mA (assumes all six LEDs solid on)

Temperature Range: 32°F to 120°F (0°C to 49°C)

Humidity: 10 to 93% Non-condensing

Dimensions: 6.8˝H x 5.8

˝W x 1.25˝D

Accessories: CH-6 Chassis; BB-2 Cabinet; BB-6 Cabinet

Wire Gauge: 12-18 AWG

Maximum IDC Wiring Resistance: 25 Ohms

External Power Supply Voltage: Regulated 24VDC

Ripple Voltage: 0.1 volts RMS maximum

IDC (supervised and power limited)

DC Voltage: 18-28 volts power limited

Frequency: DC

Current: 90mA per circuit

3825 Ohio Avenue, St. Charles, Illinois 60174

800/736-7672, FAX: 630/377-6495

www.systemsensor.com

DET. DETECTOR

MODEL COMP. ID MANUFACTURER BASE MODEL MAX DET.

1151 A SYSTEM SENSOR B110LP, B401 20

1451 A SYSTEM SENSOR B401, B401B 20

1451DH A SYSTEM SENSOR DH400 20

2151 A SYSTEM SENSOR B110LP, B401 20

2451 A SYSTEM SENSOR DH400, B401B, B401 20

2451TH A SYSTEM SENSOR B401, B401B 20

5451 A SYSTEM SENSOR B401 20

1100 A SYSTEM SENSOR N/A 20

1400 A SYSTEM SENSOR N/A 20

** 2100AT A SYSTEM SENSOR N/A 20

2100B A SYSTEM SENSOR N/A 20

2100D A SYSTEM SENSOR N/A 20

2100S A SYSTEM SENSOR N/A 20

2100TB A SYSTEM SENSOR N/A 20

2100TD A SYSTEM SENSOR N/A 20

2100TS A SYSTEM SENSOR N/A 20

2300B A SYSTEM SENSOR N/A 20

2300TB A SYSTEM SENSOR N/A 20

2400 A SYSTEM SENSOR N/A 20

2400TH A SYSTEM SENSOR N/A 20

* 2W-B A SYSTEM SENSOR N/A 20

* 2W-TB A SYSTEM SENSOR N/A 20

DH100LP A SYSTEM SENSOR N/A 20

* Class B, Style B only

** No Accessory will be supported by 2100AT

GENERAL DESCRIPTION

The CZ-6 Six Zone Interface Module is intended for use in an

intelligent alarm system. Each module provides an interface be-

tween the intelligent alarm system and a conventional alarm sys-

tem loop. A common SLC input is used for all modules, and the

initiating device loops share a common supervisory supply and

ground. Otherwise, each monitor operates independently from the

others. Each module has its own unique address.

A pair of rotary code switches is used to set the address of the ﬁrst

module from 01 to 94. The remaining modules are automatically

assigned to the next ﬁve higher addresses. Provisions are included

for disabling a maximum of two unused modules to release the

addresses to be used elsewhere. Each module also has panel con-

trolled bicolor LED indicators. The panel can cause the LEDs to

blink, latch on, or latch off.

Compatible Two-wire System Sensor Smoke Detectors for use with CZ-6 with Zone Identifier A

I56-1799-005

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - SPECIFICATIONS

BEFORE INSTALLINGThis information is included as a quick reference installation guide. Refer to the appropriate control panel installation man

Seite 2 - Mounting

CabinetsA BB-6 cabinet will house the CH-6 chassis with up to six CZ-6 modules installed on it. Refer to cabinet installation documents for dime

Seite 3 - C0226-00

D500-49-00 3 I56-1799-005Step 1: Insert the bottom of the CZ-6 module down into a rear slot on the chassis. Step 2: Carefully swing th

Seite 4 - C0241-01

0123456789BASE ADDRESSTO NEXT DEVICE –STATUSINDICATORS— +— +— +— +— +— +INOUT+0+1+2+3+4+5IDCADDRESSIDCADDRESSIDCADDRESS— +

Seite 5 - C0242-00

System Sensor warrants its enclosed product to be free from defects in materials and workmanship under normal use and service for

Seite 6

Kommentare zu diesen Handbüchern

Keine Kommentare

System-sensor CZ-6 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung System-sensor CZ-6 herunter. System Sensor CZ-6 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung System-sensor CZ-6